CEA Codes forum

Dear Didier,

When I run Diagnostic optimization with Partran, the following error returned. Is it a known issue?

Cannot open : C:/Users/.../.../result/PAR_diag1.dat
(Permission denied)

From->[DIAGNOSTIC] : Criterion diagnostic reading
Criteria setting
From->[DIAGNOSTIC] : Criteria calculation
From->[OPTIMIZATION] : Opimi
From->[DIAGNOSTIC] : Calculation

Thanks,
Wai-Ming

Dear Wai-Ming,

No, it works on my side with my own projects.
Could you send me the files of your project?

Regards,

Didier

Dear Wai-Ming,

No, it works on my side with my own projects.
Could you send me the files of your project?

I didn't see this initially, but the message "(Permission denied)" seems to indicate that you are not allowed to read this file there. Which seems very strange and incomprehensible to me, because this is certainly not the first file to be read there at this point in the process.

Regards,

Didier

Dear Wai-Ming,

Thank for your project files. Just for information, you can perfectly well send me private email via this forum, but what does it matter.

So, using the data from your second email, I have no errors during Diagnostic optimization with Partran. Perhaps you could upgrade your code in case you don't have the latest version, because I don't know how to help you, for this specific error.

Another thing, I strongly question the usefulness of DIAG_PHASE (manual is not very clear, probably), but here it is the aboslute phase. So, don't you need DIAG_DPHASE instead ? For example at the first DIAG_PHASE, abosute phase is about 1000° and you try to adjust it to 0.1° !!

Actually, I don't really understand what you are trying to do, in general, I understand quite well with regard to the structure file, what the user is trying to do, but here I admit that I can't do it, your tuning seems to me really very complex, so if it's not confidential, could you tell me what exactly you're trying to tune?

Regards,

Didier